Lesson’s learned: A WRONG CHEMICAL – WRONG TANK incident produced a chlorine release and brought EPA to the facility. The EPA inspection does not appear to have looked at the Cl2 incident, but rather stayed focused on the propylene oxide process – their “covered process”. As well, in March of this year both the facility and the trucking company involved in the WRONG CHEMICAL – WRONG TANK incident were indicted. If found guilty, the two companies could face fines totaling as much as $1.7 million.
Respondent owns and operates a gluten, starch, and alcohol production facility which processes propylene oxide which has a threshold quantity as listed in 40 C.F.R. § 68.130 of 10,000 pounds. On October 21, 2016, an accidental release of chlorine gas occurred at Respondent’s facility in connection with a chemical reaction when the delivery of sulfuric acid was unloaded into a tank of sodium hypochlorite. Approximately 140 people sought medical attention and seven people were hospitalized due to the release. On or about January 23, 2017, through January 26, 2017, representatives of the EPA conducted an inspection of Respondent’s Facility to determine compliance with Section 112(r) of the CAA and 40 C.F.R. Part 68. Information gathered during the EPA inspection confirmed that Respondent had greater than 10,000 pounds of propylene oxide in a process at the Facility. From the time Respondent first had onsite greater than 10,000 pounds of propylene oxide in a process , Respondent was subject to the requirements of Section 112(r) of the CAA, 42 U.S.C. § 7412(r), and 40 C.F.R. Part 68 because it was an owner and operator of a
stationary source that had more than a threshold quantity of a regulated substance in a process. From the time Respondent first had onsite greater than 10,000 pounds of propylene oxide in a process, Respondent was subject to the Program 3 prevention program requirements because pursuant to 40 C.F .R. § 68.1 O(h), the covered process at the Facility did not meet the eligibility requirements of Program 1 and was subject to the OSHA process safety management standard, 29 C.F.R. § 1910.119. From the time Respondent first had onsite greater than 10,000 pounds of propylene oxide in a process, Respondent was required under Section 112(r)(7) of the CAA, to submit an RMP pursuant to 40 C.F.R. § 68.12(a) and comply with the Program 3 requirements provided at 40 C.F.R. § 68.12(d) and detailed in Subpart D.
Allegations of Violations