General Safety Topics

Contractor suffered fatal chemical and thermal burns after he stepped into a deep opening in the floor obscured by puddled liquid

PRAYERS and RIP 🙏 This is why we NEVER step in puddles… MINE FATALITY – On August 4, 2024, a contractor suffered severe chemical and thermal burns after he stepped into a deep opening in the floor obscured by puddled liquid. The contractor fell into a mixture of hot water and caustic liquid. On September […]

The NY City Bridge got hot because the drive train that moves it overheated, NOT because “climate change” or ambient temperatures caused the bridge to “swell”

The NY City Bridge got hot because the drive train that moves it overheated, NOT because “climate change” or ambient temperatures caused the bridge to “swell.” I am not a metallurgist, but I did stay at a Holiday Inn Express last week. If this bridge can not operate within its design tolerance because the ambient temps

CPSC Proposes Rule to Establish Safety Standard for Residential Gas Furnaces and Boilers

On October 25, 2023, the U.S. Consumer Product Safety Commission (CPSC) published a proposed rule to establish a safety standard for residential gas furnaces and boilers. In the proposed rule, CPSC announces its preliminary determination that these products pose an unreasonable risk of injury and death. Therefore, CPSC’s proposed rule would require all residential gas

Unsafe Hot Work strikes again ($1.5M in damages)

On May 3, 2022, at about 19:45 local time, the inspected passenger vessel Natchez, with one crewmember on board standing a security watch, was moored in the Industrial Canal in New Orleans, Louisiana, undergoing renovations when a fire broke out.1 Local firefighters extinguished the fire at 2139. No pollution or injuries were reported. Damage to

Health, Safety & Environmental Coordinator (TX/OK)

IFS Coatings is a leader in the production of high performance powder coatings based in Gainesville, Texas.  We strive to be the best supplier of high performance powder coatings meeting the specialty needs of industry with speed, integrity and responsibility to our employees, customers and communities in which we exist. Description: We are seeking a

ISO’s 45001- Safety Management System

ISO 45001 is a consensus standard and is being developed through a rigorous process. We will endeavor to provide a description of the draft standard, discuss the performance expectations, and provide an overview of actions, processes, and procedures required for ISO 45001 alignment. The standard was written in customary business English. The terminology has been harmonized with

Scroll to Top