Safety is everybody’s business, and our safety process requires the active participation of management, supervisors and shift workers. NO ONE INDIVIDUAL or group can do the job alone.
- If you don’t hold up your end, then the company’s safety procedures, training and equipment don’t get used effectively and accidents will happen.
- If you don’t stay alert and report accidents, near misses and unsafe acts and conditions that you experience or observe, we may not know about them and would not be able to correct them and improve the prospect for everyone’s safety.
I. Responsibility Number One – Recognize Hazards
- Know what constitutes a hazard
- Be on the lookout for hazards
- Correct or report hazards
- Know what constitutes an unsafe act:
- working without appropriate PPE,
- mixing incompatible chemicals,
- using a machine/equipment without a guard,
- tossing tools around,
- using extension cords improperly or not using a GFCI
- Not meeting permit requirements
- Look for:
- tripping and falling hazards,
- impact hazards (is there something that you can bump into or be struck by?),
- puncture and splinter hazards,
- electrical hazards,
- chemical or material hazards,
- blocked exits,
- unlabeled containers
- Good Housekeeping is a major part of keeping your work area safe. For example, you should take a few minutes each day to ensure that aisles, hallways, and stairways in your work area are not obstructed.
- If boxes, equipment, or anything else is left to pile up, you have a tripping hazard on your hands. Those obstructions could keep you from exiting the building quickly and safely should you face an emergency situation.
II. Responsibility Number Two – Report Hazards
A big part of recognizing hazards is using your instincts. Nobody knows your job as well as you, so we’re counting on you to let us know about possible problems.
Beyond recognizing hazards, you have to correct them or report them to someone who can.
This too, is a judgement call. For example, if something spills in your work area you can probably clean it up yourself.
However, if there is an unlabeled chemical container and you have no idea what it is, you MUST report it to your supervisor.
III. Know and use Safe Job Procedures
The training you receive gives you the information and equipment to do a job safely.
It is your responsibility to make use of what you know or to seek clarification on instructions given prior to doing a task.
Keep Thinking. Even if you’re doing your job safely and you are avoiding hazards, there are often even better ways to work safely.
If you have ideas for improving the safety of your job or that of co-workers, share them.
“All labour that uplifts humanity has dignity and importance and should be undertaken with painstaking excellence”
Martin Luther King Jr.
