THE CROSBY GROUP’S focus has always been on providing products of uncompromising quality. We go to great lengths to engineer and test our products to ensure that our quality is second to none . Nothing is more important to us than the satisfaction and safety of our customers. To that end, we have discovered that a small percentage of the above listed A- 342 and A-345 Master Links and Master Link Assemblies may have a limitation if used well above the stated working load limits. There have been no field failures, and in additional testing, these products performed as they should through the stated working load limit . In fact, we have only found these rare issues to occur during overload testing with the lowest incident occurring at 2 limes the stated working load limit. While we are confident that these products will perform as intended when used within their stated working load limits, Crosby is committed to ensuring our products go above and beyond industry standards . Because there is a possibility that a small subset of these products may not reach our targeted Design Factor of 5 times the working load limit, Crosby has decided to initiate this Safety Alert. By use of the Product Identification Code (PIC) symbols which appear on the product, we have identified the Master Links and Master Link Assemblies that may be affected. The respective PIC codes are as follows. CLICK HERE (pdf) for the Safety Alert
