This image from a UK HSE publication may be the best image I have seen on “process safety” and Basic Process Controls Systems (BPCS). It shows how we PREVENT “overfill” events, also known as a Loss of Primary Containment (LOPC) event in atmospheric storage tanks/vessels. The entire publication is a MUST-read for those who store […]
A common question we get regarding flammable liquids is: Do we have to ground and bond non-conductive containers smaller than 5 gallons? The proper question should be… what do we need to do to SAFELY transfer flammable liquids into non-conductive containers that are 5 gallons and smaller? The British Columbian Worker’s Compensation Board
The battle continues, this time outside process safety! I get these arguments routinely when people inquire if they can use their HHC/EHS as the media for pressure and leak testing. I can only assume that PHMSA is getting pushback by requiring water or other similar viscosity liquid to be used as the test medium. When
A worker, 41, sustained a serious head injury and died during a piping pressure test. A pipe had been pressurized for testing, and during the pressure release process, a plate from the pipe system broke free and hit the worker in the head. The MI-OSHA case file is still open.
Four employees were testing an 8″ chiller pipe with pressure when a piping joint failed and an employee was struck in the shoulder and head by a valve cap. The employee was transported by ambulance to a Hospital.
On August 28, 2023, at 7:30 a.m., a worker was welding in a confined space on a ship under construction. The victim was found unresponsive inside of the confined space. Per the medical examiner’s report, the employee was killed as a result of suffocation in an oxygen-deficient environment. NOTE: this is likely due to a
Your letter discusses concerns with the safety of compressed gas cylinders on some types of portable carts configured for “in use” or “connected for use.” Specifically, you mention that cylinders, which are top heavy and therefore can be unstable (unbalanced), are commonly found poorly secured to the cart and leave the cylinders susceptible to toppling
After 30+ years of OSHA’s PSM standard (1910.119), we still come across far too many businesses that just do not understand the difference between the “INVESTIGATION” and the “CASUAL ANALYSIS.” I use this image from my training course(s) to help them differentiate between the two INDIVIDUAL and SEPARATE steps in the Incident Investigation element (1910.119(m)).
1910.165(b)(3) The employee alarm shall be distinctive and recognizable as a signal to evacuate the work area or to perform actions designated under the emergency action plan. After an employee becomes aware of an emergency situation, the next step involves actions to be performed by that employee. Generally, the actions include evacuation or emergency
My Dad had my brother and I set goals in our lives when we turned 16 years old. Financial, Professional, etc. At 16, we were too young to understand any of it, but he got us thinking. By 18, we started to have an idea of what we wanted when we “grew up”. Take for
I’m not asking for much, but before I leave this great and honorable profession, I just hope we can GET BACK TO THE FUNDAMENTALS! A great place to start would be to eradicate all these “Worked ____ Days” signs and progress to celebrate what got us those injury-free days. As I have said for decades…
Did the 2024 edition of NFPA 77, Recommended Practice on Static Electricity establish a norm for “relaxation time”? In six (6) different sections across five (5) chapters, the recommended practice cites “30 seconds” as a “suitable precaution.” (emphasis by me)
