Yes, as many of you have figured out I am a big fan of using the Management of Change process to actually manage changes that may officially be outside the PSM/RMP requirements. But how OSHA changing their injury/illness reporting requirements impact my Process Safety Management System? Here’s how…
The incident just occurred yesterday (8/21/14). A miner operator (underground coal) was cutting rock bottoms in a mine construction area, when he either hit a rib bolt with the cutter head, or a miner bit sheared in two. In either case, the steel fragment became a high speed projectile and struck the employee in the
A rather well-known “management consultant” back in the ’70s and ’80s was Forrest H. Kirkpatrick and Mr. Kirkpatrick wrote a poem about leadership that hangs on my office wall. It pretty much sums up what being a safety leader is all about – even though Mr. Kirkpatrick meant for it to be a message to all
A 51-year-old worker was fatally injured when he became engulfed in flowing grain in a railcar load-out elevator. On March 15, 2014, the incident occurred when the worker attempted to remove a jam from a chute while the auger operated. OSHA has cited the company for one willful, two repeat and eight serious safety violations,
EPA contacted the facility by letter in January 2014 to determine the facility’s compliance with RMP. Based on communications with the facility, EPA determined that the facility exceeded the threshold for chloroform on 2/17/2010; however, the facility submitted their RMP with EPA on 4/14/2014. The fine was $172,900 for a violation of 68.12 and 68.150
EPA contacted the facility by letter in January 2014 to determine the facility’s compliance with RMP. Based on communications with the facility, EPA determined that the facility had more than 10,000 pounds of Anhydrous Ammonia in a process; however, the facility had not filed an RMP with EPA. The fine was $57,000 for a violation
The Top 10 for Fiscal Year 2014 are: Fall protection (1926.501) = 6,143 Hazard Communication (1910.1200) = 5,161 Scaffolding (1926.451) = 4,029 Respiratory Protection (1910.134) = 3,223 Lockout/Tagout (1910.147) = 2,704 Powered Industrial Trucks (1910.178) = 2,662 Electrical – Wiring Methods (1910.305) = 2,490 Ladders (1926.1053) = 2,448 Machine Guarding (1910.212) = 2,200 Electrical –
2nd Quarter UPDATE with 289 Shocker and Accident Photos Now over 13,750 exclusive unsafe acts/conditions and accident/injuries photos and over 1,000 ppt’s & doc’s from more than 2,776 contributors! Many THANKS to my RENEWING “Partners in Safety“ since 2009 since 2011 2014 Fatality Tracker Electrical 38 (2013 = 32) (2012 = 68) Forklift/Manlift 37 (2013=62)
Another great video showing the power of a compressed gas cylinder! This from a German TV show called… Nicht nachmachen! (English: Don’t Do This!)
Not meant to be a trick question, but the matter of workers who MUST wear medically prescribed devices and work in Class I, II, and/or III Hazardous Locations tends to be a constant question for facilities that have HAZLOCs. Low voltage equipment is always a battle in HAZLOC! I swear the engineering schools in this
Inadequate safeguards to protect workers against potential ammonia releases at an ice plant have resulted in $264,700 in fines at a nationwide ice manufacturer and distributor. This inspection was conducted under OSHA’s PSM Covered Chemical Facilities National Emphasis Program. OSHA cited the company for 19 violations of workplace safety standards following a comprehensive inspection that
