I am sharing this incident as we continue to find air receivers that are 20+ years old and have never once been inspected as a pressure vessel. We even see this in PSM/RMP-covered facilities – the facility does a nice job on their process pressure vessels, but overlooks their air receivers. Air receivers have a […]
A 60-year-old female worker in a plastic moulding workshop was cleaning a large plastic bin. The bin had been vacuum cleaned and then sprayed with ‘Ambersil’, a highly flammable mould-removing aerosol spray that can be purchased for domestic use. The patient attempted to wipe the bin, but when she placed her face inside it to
At around 2 p.m., the truck caught fire during what was described as a routine annual meter inspection by New York State Weights and Measures technicians. It involved the transfer of 100-octane aviation gasoline between internal tanks on the truck. As testing concluded and fuel was being returned to the tank, vapors emitted from the
At 11:30 a.m. on September 7, 2024, Employee #1 (41) and the owner (51) were working inside a silage silo when they were overcome by hazardous vapors. A third employee entered the silo in an attempt to assist them.
I wish OSHA would provide more details on this facility, but this is all we got… At 10:00 p.m. on October 10, 2024, an employee (33) and a coworker working as boilermakers for a facilities support service were working on a 12-inch pipe to flip the blind. The pipe released hydrogen sulfide gas, exposing the
At 10:00 a.m. on November 13, 2024, Employee #1 (23) was inside a large section of HVAC duct applying Design Polymerics DP 2590 Duct Liner Spray Adhesive to repair sagging insulation. After completing the adhesive application, Employee #1 used a pin welder to secure the insulation. While using the welder, a spark ignited flammable vapors
At 1:53 p.m. on September 18, 2024, Employee #1 (27) was working with a barrel containing an unknown substance when the barrel exploded. The explosion caused blunt force trauma to the employee’s face and head. The steel barrel was the source of the impact. The employee was fatally injured by the blast.
At 2:46 p.m. on September 16, 2024, Employee #1 (20) and Employee #2 (age unknown) were conducting inspections and maintenance on a tanker trailer previously used to transport propane. The tank was to be emptied using flaring, in which the remaining gas is vented through a hose to a large tripod “flare” device. The top
I have scrubbed the names of the accused and deceased worker, as this could happen at just about any facility where hazardous materials are present. I should also state, the lawyers are suing the Refinery, the deceased employer (a contractor firm hired by the refinery), the manufacturer of the H2S monitor, the parent company of
Respondent owns and operates a Gas Plant. On or about July 11 and 12, 2023, representatives of the EPA inspected the Respondent’s Facility to determine compliance with Section 112(r) of the CAA and 40 C.F.R. Part 68. Information gathered during the EPA inspection revealed that Respondent had greater than 10,000 pounds of propane and greater
In August 2024, while loading anhydrous ammonia into a railcar at a manufacturing site, a shear coupling on the loadout arm failed to function. Two out of three bolts failed, causing the coupling to open and resulting in a loss of primary containment (LOPC) of pressurized liquefied ammonia, which formed an ammonia vapor cloud. A
All alcohols are NOT created equal! Alcohols may be flammable, but there is one alcohol whose flammability is NOT its primary hazard. Most know about ETHANOL. It is used in fuels, as well as in food and drinks. It is flammable, and its flammability is its PRIMARY HAZARD. But its sister, METHANOL, is VERY DIFFERENT.
