This draft guidance document is intended to clarify to the public regarding existing pipeline safety standards. The contents of this document do not have the force and effect of law and are not meant to bind the public in any way, but pipeline operators must comply with the underlying safety standards. (emphasis by me)
Most facilities will have a piece of equipment that is so large and complex that it will entail isolating many sources of all types of energy in order to get the entire system to a zero energy state (ZES). But what do we do when we have a task that involves exposure to only one
The 2021 edition of the International Fire ode (IFC) basically re-wrote the entire chapter on Combustible dust; which is a major improvement from the 2018 edition. Here are the highlights from the 2021 IFC, Chapter 22 – Combustible Dust-Producing Operations…
In the recently released Internation Fire Code (IFC) 2021 edition, the newly designated Section 608 – Mechanical Refrigeration, the code references IIAR 2, 6, 7, 8, and 9 when the refrigerant used is anhydrous ammonia (NH3). The 2021 edition still has many of the long-time requirements that will apply to NH3 systems, such as “emergency
Have you seen the latest meme claiming that if masks work then why do we need social distance and if social distancing works then why do we need to wear masks? This lame logic is taking hold in the world of social media so I thought I would provide a way for folks to better
So OSHA made some serious improvements in their latest Construction Standard, 1926.1201-.1213, for confined spaces. But there is another option to “upgrade” our efforts for entry safety practices and that is NFPA 326 – Standard for the Safeguarding of Tanks and Containers for Entry, Cleaning, or Repair.
NFPA 497, Table 4.4.2. has become my “go-to” source for chemical-physical property data for my flammables (along with the SDS). Although they use Celsius rather than Fahrenheit, and this drives me crazy just because I am “old school”, this table is instrumental for understanding the “Group” your flammable gas/vapors belong to! In the 2021 edition
Enclosed processing areas (vs. outside and open processing areas) that are handling/using the following, shall be ventilated at a rate sufficient to maintain the concentration of flammable vapors within the area at or below 25% of their lower flammable limit (LFL). Class I flammable liquids or as OSHA calls them Category 1/2 flammable liquids, Class II
Liquid storage areas where dispensing is conducted must have either a gravity ventilation system or a continuous mechanical exhaust ventilation system. If the dispensing involves Class I liquids (e.g. Category 1 & 2 liquids per OSHA terminology) mechanical ventilation is the ONLY acceptable option. Regardless of the type used there are some FUNDAMENTAL requirements that
For the 2021 edition of NFPA 30, the committee introduced a sweeping change in the classification scheme for liquids. The term ignitible liquid has been introduced to initiate a process whereby the terms flammable liquid and combustible liquid are no longer used. This causes the requirements in NFPA 30 and other codes and standards to
The 2021 International Fire Code (IFC) contains regulations to safeguard life and property from fires and explosion hazards. Topics include general precautions, emergency planning, and preparedness, fire department access and water supplies, automatic sprinkler systems, fire alarm systems, special hazards, and the storage and use of hazardous materials. Key changes to the 2021 IFC include:
All new or modified chlorine piping systems must undergo pressure testing to verify the integrity of the piping (see section 11.4 for leak testing). ASME B31.3 (13.2.8 ), Process Piping testing requirements, should be applied as a minimum standard. There are three (3) types of acceptable testing methods: hydrostatic testing, pneumatic testing, and the alternate
