Recently OSHA.gov has been experiencing some serious issues and although it appears to have gotten almost back to normal, sometimes access to standards is lost. And if you’re like me and do a lot of work in locations where there is no internet connection and you need the standards for a project, here is a…...
A lot is going on with HAZCOM this year and the biggest activity is the conversion from the old MSDSs to the new 16 section format for the SDSs. OSHA recently issued a LOI to clarify the the compliance date… Question: When is an employer required to replace their MSDS collection with revised SDSs in…...
I recently participated in a PHA for a large flammable liquids process and during the “facility siting” portion of the PHA we took a detailed tour of the process. During which, several significant “impact” hazards were identified. Of course, the long-time engineering manager (40 plus years of fine service at the facility) quickly went to the…...
Over 12,000 exclusive unsafe acts/conditions and accident/injuries photos and over 1,100 ppt’s & doc’s from more than 2,782 contributors! 2015 Fatality Tracker Electrical 9 (2014 =55) (2013 = 32) (2012 = 68) Forklift/Aerial 5 (2014 = 60) (2013=62) (2012 = 52) Mining* 8 (2014 = 401) (2013=87*) (2012 = 92*) *ONLY developed nations and…...
(A) Section 1301 General (1) 1301.1 Scope. The equipment, processes and operations involving dust explosion hazards shall comply with the provisions of this rule. (2) 1301.2 Permits. Permits shall be required for combustible dust-producing operations as set forth in rule 1301:7-7-01 of the Administrative Code. (B) Section 1302 Definitions (1) 1302.1 Definition. The following word…...
… Membership Required You must be a member to access this content.View Membership LevelsAlready a member? Log in here...
… Membership Required You must be a member to access this content.View Membership LevelsAlready a member? Log in here...
OSHA issued a memorandum to its Regional Administrators and State Designees on 12/242014. The memorandum provides Area Offices with guidance on when an on-site inspection is warranted. OSHA has divided injury and illness reports into three categories. OSHA will inspect facilities that report an injury or illness that falls into one of the first two…...
A crew was conducting well kill operations on a sweet oil well. A worker was monitoring the return flow to the service rig trough from on top of the rig tank. When the returns became gassier, the return flow was opened to the degasser section of the rig tank and the trough flow was pinched…...
This Alert is intended to inform the industry that companies must take responsibility to prevent accidental releases of dangerous chemicals like anhydrous ammonia through compliance with CAA’s Chemical Accident Prevention Program. Evidence gathered by the U.S. Environmental Protection Agency (EPA) indicates that some refrigeration facilities may be failing to properly manage hazardous chemicals, including…...
Over the years I have posted several articles about hazardous materials being unloaded to the wrong tank. And it seems that each time I do I get several e-mails stating how rare these events are and that I am being an alarmist. So I thought I would post a section of a PHMSA Investigation Report…...
This was an actual weld that was found during a major upgrade to a process. The next time someone says “weld inspections” and “certifications” are not necessary… remember this image! … Membership Required You must be a member to access this content.View Membership LevelsAlready a member? Log in here...
