I think this is NEW, but the only thing I deal with from EPA is RMP and EPCRA so this may have been around and I did not know about it; however, it just popped up on my radar as a “new” addition to EPA.gov. And it is a NICE tool! Substance Registry Services (SRS) […]
1910.252(a)(2)(vi) Prohibited areas. Cutting or welding shall not be permitted in the following situations:…1910.252(a)(2)(vi)(C) In the presence of explosive atmospheres (mixtures of flammable gases, vapors, liquids, or dusts with air), or explosive atmospheres that may develop inside uncleaned or improperly prepared tanks or equipment which have previously contained such materials, or that may develop in
This week’s video is an excellent example as to why we want our Hazardous Materials well away from all types of forklift traffic. I would even add that the tank area had too many combustibles stored near it.
On February 11, 2018, about 1:15 p.m. a module of 25 horizontally mounted high-pressure gas cylinders loaded with 240 kilograms (kg) of compressed hydrogen, UN1049, caught fire while being transported. The incident occurred on Golden Springs Drive, near South Brea Canyon Road, in Diamond Bar, California. About 120 kg of the hydrogen was released from
The Bureau of Safety and Environmental Enforcement (BSEE) recently conducted a review of the latest compliance and incident data to identify safety trends throughout the Gulf of Mexico. The analysis pointed to a potential risk associated with gas releases. During the timeframe reviewed, thirty-one gas release incidents were reported to BSEE by fourteen unique operators.
Respondent is the owner and operator of a pork harvesting, processing, and packaging facility which utilizes 250,000 pounds of anhydrous ammonia in its refrigeration system. On April 20, 2016, EPA inspected the Facility in order to determine the Facility’s compliance with the Chemical Accident Prevention Provisions of 40 C.F.R. Part 68. Based upon the information
SAFTENG NOTE: This is the first time I have come across a citation from either OSHA or EPA where they took issue with the Ammonia Flammability Limits as depicted on the NFPA 704 Diamond located on the engine/machinery room door. The facility had not updated their label to show NH3 as an F=3 for indoors;
In 2017, the NBIC was restructured into four (4) parts, adding a new Part 4, Pressure Relief Devices. This purpose of this restructuring was to provide one distinct integrated part for pressure relief devices compiled from all PRD information referenced in Part 1, Installation; Part 2, Inspection; and Part 3, Repairs and Alterations. And in
An “Emergency Pressure Control System” has been a requirement in the IFC and IMC for several iterations of these codes, and yet it can be a very confusing requirement as they are not found in the vast majority of mechanical refrigeration systems using Anhydrous Ammonia as the refrigerant. Part of the problem may lie in
Those of us under Federal OSHA can let our contractors follow their own LOTO program/practices AS LONG AS they explain them to us. However, in some states, their OSHA plan requires contractors to support the “on-site employer’s” LOTO program. As I have written about, most workplaces struggle to manage their contractors PROPERLY when LOTO is
Those who practice “process safety” are all too familiar with “Line/Equipment Opening” safe work practices. Although there is NO formal OSHA standard, nor even a RAGAGEP on this extremely hazardous task, we should consider implementing a “permit” of some type to manage the risks associated with opening any pipe, line, hose, equipment that handles a
I know we are past the 2018 reporting deadline (March 1st), but last week (4/10/18) EPA posted a beneficial tool for those of you who work with EPCRA Tier Sheets. EPA and OSHA did an excellent job developing this cross-walk worksheet to assist facilities in comparing OSHA’s original and new physical and health hazards adopted
