Below is a listing of OSHA’s General Industry Standards that require some type of written program or plan…. Membership Required You must be a member to access this content.View Membership LevelsAlready a member? Log in here...
IMPORTANT NOTE: This is NOT an official listing and is NOT meant to include 100% of all REQUIRED postings, labels, and signs. It is an effort by one individual to identify those OSHA 1910 std’s that require some sign, posting, or label to better prepare a workplace regarding OSHA signage and posting requirements. The user…...
The vessel you are viewing is part of a PSM Covered process. I have blacked out pipe and vessel labeling, as it does not matter what the HHC/EHS is or the type of process. Pay close attention to the sight glass column in the center of the picture. The process vessel shown has a safe…...
MANY THANKS to my NEW & RENEWING “Partners in Safety” for their support! since 2012 since 2012 since 2008 formerly Beta Steel since 2006 2012 Fatality Tracker Electrical 35 (2011 = 81) (2010 = 90) (2009 = 100) Forklift/Manlift Mobile Equipment 29 (2011 = 84) (2010 = 110) (2009 = 88) Mining 36 (2011…...
… Membership Required You must be a member to access this content.View Membership LevelsAlready a member? Log in here...
A Process Hazards Analysis (PHA) may very well be the best tool that has come along to the safety profession since the fire extinguisher! I am kidding of course, well sort of, as the PHA methodologies (and there are many) can be used in so many situations that it is used outside of PSM/RMP as…...
Did you know that OSHA still does NOT require an actual Hotwork Permit, UNLESS you are doing the Hotwork in, on, or adjacent to a PSM covered process? It’s true, 1910.252(a)(2)(iv) uses the phrase “preferably in the form of a written permit“. It was not until OSHA put the Process Safety Management Standard (PSM) in place…...
The U.S. Environmental Protection Agency (EPA or the Agency) is taking final action to revise the manner for applying the threshold planning quantities (TPQs) for those extremely hazardous substances (EHSs) that are non-reactive solid chemicals in solution. This revision allows facilities subject to the Emergency Planning requirements that have a non-reactive solid EHS in solution,…...
This overview outlines key elements of the ISA84 committee on process sector functional safety, including scope, purpose, history, and technical issues. It also provides a preview of the forthcoming 2nd edition of ANSI/ISA-84.00.01 (IEC 61511 Mod)…. Membership Required You must be a member to access this content.View Membership LevelsAlready a member? Log in here...
This appears to be an inspection after an ammonia leak in a food processing area that impacted a contractor and food production workers. A contractor drilled into what was thought to have been an “abandoned line” releasing the ammonia. The leak was on 12/3/11 and the inspection began on 12/12/11. Some very enlightening citations for…...
Although this is about athletic eye and face protection fogging, if ASTM is successful with athletic eye and face protection it will have a HUGE IMPACT on workplace safety eye and face protection!… Membership Required You must be a member to access this content.View Membership LevelsAlready a member? Log in here...
MANY THANKS to my NEW & RENEWING “Partners in Safety” for their support! since 2012 since 2008 formerly Beta Steel since 2006 since 2012 2012 Fatality Tracker Electrical 35 (2011 = 81) (2010 = 90) (2009 = 100) Forklift/Manlift Mobile Equipment 29 (2011 = 84) (2010 = 110) (2009 = 88) Mining 36 (2011 =…...
