Safety Info Posts

From an EAP to an ERP???

I want to thank so many of you for your positive comments about last weeks newsletter.  The traditional OSH news has been a bit slow in recent weeks, so I tried to offer some personal insights.  One question that I got from several readers and we seem to get in most of our auditing work

PHMSA is amending the HAZMAT Regulations to maintain alignment with international standards

PHMSA is amending the Hazardous Materials Regulations to maintain alignment with international standards by incorporating various amendments, including changes to proper shipping names, hazard classes, packing groups, special provisions, packaging authorizations, air transport limited quantities, and vessel stowage requirements. These revisions are necessary to harmonize the Hazardous Materials Regulations with recent changes made to the

West Virginia Enacts CSB Plan for Licensed Propane Techs

The State of West Virginia now requires that propane technicians be trained, certified, and licensed. The Chemical Safety Board issued the recommendation following the CSB investigation of a propane explosion at the Little General Store in Ghent, WV, that occurred on Jan. 30, 2007. The blast killed four people and seriously injured five others. The

St. Louis employers ordered incarcerated for failing to comply with OSHA citations and court sanctions

The U.S. Department of Labor’s Occupational Safety and Health Administration today announced the arrest of Brian Andre, former owner of Andre Tuckpointing and Brickwork, and Regina Shaw, owner of Andre Stone & Mason Work Inc., the successor company to Andre Tuckpointing and Brickwork. The Eighth Circuit Court of Appeals in St. Louis ordered their arrest

OSHA withdraws proposed interpretation on noise

OSHA announced late last week that it is withdrawing its proposed interpretation titled “Interpretation of OSHA’s Provisions for Feasible Administrative or Engineering Controls of Occupational Noise.” The interpretation would have clarified the term “feasible administrative or engineering controls” as used in OSHA’s noise standard. The proposed interpretation was published in the Federal Register on Oct.

How strong is your headcount procedure?

Here are a few tips that will improve not only your compliance but also the overall efficiency of your emergency action plan. 1) ALWAYS have two muster/assembly areas (e.g., a primary and a secondary) on opposite ends of the facility 2) MARK/LABEL these areas accordingly so that it is noticeable to contractors, truck drivers, visitors

Scroll to Top