CLICK HERE to Renew your Membership
CLICK HERE for a NEW Membership
CLICK HERE to see eligibility requirements for FREE Membership
If you have any questions, please contact me
I am proud to announce that SAFTENG and The Chlorine Institute have renewed our partnership for another year (through 2026). Members of The Chlorine Institute receive a FREE SAFTENG membership. If you qualify, please contact me
NOTE: Any trade group interested in becoming a partner with SAFTENG for your Member Companies, please reach out, and I can share the plan
SAFTENG has:
- Over 19,000 categorized unsafe acts/conditions and accident/injury photos
- Over 1,500 ppt's & doc's in the SAFTENG Library
- Over 5,000 Technical Articles on Process Safety, Emergency Response & OSH topics
- Over 450 videos (those not allowed on YouTube Channel)
Many THANKS to my NEW Members and those who CONTINUE to support SAFTENG:
What are the mandatory elements that must be included in a baseline physical examination under 29 CFR 1910.120(q)(9)(i)? Are there mandatory exclusionary criteria?
…
HomeRead More »
Read More
On July 13, 2012, EPA modified the EPCRA Section 312 Emergency and Hazardous Chemical Inventory Forms (Tier I and Tier II) to add new mandatory and optional data elements under the facility identification and contact information sections of both forms. EPA also revised some existing data elements on the chemical reporting section of the forms to make reporting easier for facilities and make the forms...
Read More
(UPDATED with agenda on 8/20/12) The SAFTENG.net LLC Team will be conducting our OSHA Boot Camp training for one of our local Cincinnati clients. I normally do not open this training up to outsiders, but the feedback we have received after the last couple of courses suggested that I make this course one of the FREE or REDUCED PRICE training courses we offer. So here we go…
…...
Read More
I love these types of videos! A skeptic decides to do his own testing on a pair of ANSI approved safety glasses made by 3M. He is certain that his pellet gun will break the lens at 600 fps. To his surprise the glasses hold up at 600 fs. The video even shows the impact in slow-motion and zoomed in on the glasses. He then tries it again at 800 fps, again he is certain that...
Read More
I could not help but post this. I could not shorten this clip and of course the part I want is 3:35 to the end (4:17). But I just knew there was something “special” about Sheldon… he is SERIOUS about safety! Click Here to view the scene. Only true safety radicals can appreciate this humor, so if you smile you may be a safety radical! Sadly I had gotten...
Read More
MANY THANKS to my NEW & RENEWING
“Partners in Safety” for their support!
since 2012
since 2009
since 2012
since 2012
2012 Fatality Tracker
Electrical
40
(2011 = 81)
(2010 = 90)
(2009 = 100)
Forklift/Manlift
Mobile Equipment
34
(2011 = 84)
(2010 = 110)
(2009 = 88)
Mining
42
(2011...
Read More
Another major incident investigation finds serious cultural failures, poor training for operators and emergency responders, poor emergency planning, and technical failures in the Mechanical Integrity program. The crude oil pipeline company’s pervasive organizational failures caused a massive 2010 spill in Michigan, a National Transportation Safety Board (NTSB) preliminary investigation has found....
Read More
Recently, the National Institute for Occupational Safety and Health (NIOSH) received numerous reports of issues concerning SCBA respirators suspected of not meeting the necessary NIOSH performance requirements. We have observed that SCBA problems often can be attributed to a lack of, or improperly performed, preventative maintenance. Correct inspection, maintenance, and service procedures are all vital...
Read More
Nearly all foodstuffs and ingredients including grain, sugar, artificial sweeteners, starch, and flavours will burn with difficulty as a powder layer, but they can explode violently when ignited in the form of a dust cloud. Here Mike Weaver, Principal Specialist at Chilworth Global, looks at the extent and nature of the problem within the industry, the basis of safety, and protection and prevention...
Read More
This computer-based tool estimates of work/rest regimen during work in a hot environment according to 2007 ACGIH® “Documentation of TLVs®”. Parameters are: metabolic rate, WBGT temperature values at the workstation and the rest location, and the clothing worn by the worker.
Click Here to download this EXCEL spreadhseet.
Read More
Partner Organizations
Member Associations
