The EPA’s Risk Management Plan (RMP) rule was the first time many EHS professionals had ever heard of Emergency Response Planning Guidelines (ERPGs). That was 1999, and still today 2007 there are many EHS professionals outside the PSM/RMP arena who still have not heard of ERPG’s. This article is an attempt to explain what they are and how they are used in emergency response planning and EPA and OSHA standards.
The official defintion is… ERPGs are exposure guidelines designed to anticipate health effects from exposure to certain airborne chemical concentrations.
ERPGs estimate the concentrations at which most people will begin to experience health effects if they are exposed to a hazardous airborne chemical for 1 hour. (Sensitive members of the public—such as old, sick, or very young people—are NOTcovered by these guidelines and they may experience adverse effects at concentrations BELOW the ERPG values). A chemical may have up to three (3) ERPG values, each of which corresponds to a specific tier of health effects.
The three ERPG tiers are defined as follows:
- ERPG-3
- ERPG-2
- ERPG-1
The ERPGs are developed by the Emergency Response Planning committee of the American Industrial Hygiene Association. The ERPG guidelines are clearly defined and based on extensive and current data. The rationale for selecting each value is explained, and other pertinent information is also provided. Each guideline identifies:
- the substance,
- its chemical and structural properties,
- animal toxicology data,
- human experience,
- existing exposure guidelines,
- the rationale behind the selected value, and
- a list of references.
To find out more about the ERPG development process, go to the ERPG Program website
What substances have ERPGs
As of early 2012, about 145 chemicals have ERPGs (see the current list of substances that have ERPGs [PDF, 40 KB]). You can also search for a specific substance on the CAMEO Chemicals site to find response recommendations and chemical data (including ERPGs).
How should ERPGs be used?
ERPGs should be used to help protect the public when Acute Exposure Guide Lines (AEGLs) are NOT available AND there has been a chemical release that is short-term in duration. ERPGs estimate how nearly all of the public (except for sensitive individuals) would react to a release of this nature, so they can be used to identify areas where a hazard exists if the concentration of hazardous gas is exceeded for the specified exposure duration. For example, in areas with concentrations just above the ERPG-1, most people would experience temporary, non-disabling effects. On the other hand, in areas with concentrations just above the ERPG-2, most people would experience significant—but not life-threatening—health effects.
These guidelines are focused on one period of time: 1 hour. Exposure in the field may be longer or shorter. However, the American Industrial Hygiene Association STRONGLY advises against trying to extrapolate ERPG values to longer periods of time.
ERPGs should NOT be used as:
- Guidelines for workers who are routinely exposed to chemicals for longer durations. In such cases, you should use workplace exposure limits (WELs, OSHA PELs, ACGIH TLVs), because they contain safety factors specific to that type of exposure.
- Guidelines for members of the public who are exposed to background chemical releases for longer durations. In these types of air quality issues, values such as the National Ambient Air Quality Standards (NAAQS).
How does ALOHA use ERPGs
In Areal Locations of Hazardous Atmospheres (ALOHA) you can choose ERPGs as your toxic Levels of Concern (LOCs) when modeling a toxic chemical release, if ERPGs have been established for that chemical. ALOHA allows you to specify up to three toxic LOCs. So, you can choose the ERPG-1, ERPG-2, and ERPG-3 values to generate a threat zone estimate where yellow, orange, and red zones indicate areas where those values were predicted to be exceeded at some point after the chemical release began. (To determine how long the LOC was exceeded at a particular location, read the Ask Dr. ALOHA article on working with the concentration graph.)
For chemicals defined under the ERPG classification system, ALOHA will provide the ERPG values as the default toxic LOCs until AEGL values are established.