Bryan Haywood

NFPA 350 – Preliminary Draft of Guide for Safe Confined Space Entry and Work is Open for Public Input

The NFPA Standards Council has approved the preliminary draft of NFPA 350, and is now open for public input. With non-mandatory language, this guide incorporates the best practices that organizations and confined space professionals have utilized to comply with regulations and standards for the past 20 years since the initial publication of OSHA’s final rule…....

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

OSHA issues PSM citations to ice maker (NH3 and $147K)

A nationwide ice maker has been cited by OSHA for 9 serious and 3 repeat workplace safety violations for $147,000 at it’s Fairport, NY, plant. The inspection was conducted under OSHA’s Site-Specific Targeting Program that directs enforcement resources to high-hazard workplaces where the highest rates of injuries and illnesses occur. OSHA inspectors found workers exposed…...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

36 incidents & 1 update (8/25/13)

    2013 Fatality Tracker Electrical 22 (2012 = 68) (2011 = 81) (2010 = 90) (2009 = 100) Forklift/Manlift 46 (2012 = 52) (2011 = 84) (2010 = 110) (2009 = 88) Mining* 41 (2012 = 92*) (2011 = 248) (2010 = 480) (2009 = 586) *no longer includes China accidents Explosions 121 (2012…...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

2013 Video of the Week #34 (LOTO Failures: High Pressure/Temperature Steam Release During Engine Room Repair)

Although this video is using a ship LOTO, the SAME APPLICATION of LOTO on any steam system is relevant!!!!  GREAT video on locking out high pressure steam and the IMPORTANCE of verifying ZERO ENERGY STATE on complex processes!… Membership Required You must be a member to access this content.View Membership LevelsAlready a member? Log in...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

What is a “Tell-Tale” gauge and why is it significant in process safety

How can such a little gauge play such a BIG role in process safety? It is actually quite simple, yet so many relief system designs fail to incorporate them. These gauges are BOTH critical to process safety AND compliance with PSM/RMP. In this article, I will explain what a “tell-tale” gauge is and what purpose…...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

EPA RMP Citations @ chemical plant (chloroform, ethyl ether, formaldehyde, and HF)

The Respondent, a manufacturer, packager and distributer of multiple grades of high-purity solvents, acids, salts and bonded phase products, has four RMProgram covered processes which stores or otherwise uses chloroform, ethyl ether, formaldehyde, and hydrogen fluoride in amounts exceeding their applicable thresholds of 20,000; 10,000; 15,000; and 1,000 pounds respectively. Based on an RMProgram compliance monitoring…...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

EPA RMP Citations @ fertilizer manufacturing plant (NH3 and $58,788)

November 2-3, 2011, EPA conducted an inspection of fertilizer manufacturing plant (Anhydrous Ammonia) to determine compliance with Section 112(r) of the Clean Air Act and 40 C.F.R. Part 68.  Information gathered during the EPA inspection revealed the facility had greater than 10,000 pounds of anhydrous ammonia in a process at its facility. From the time…...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

OSHA cites salt manufacturing plant for PSM violations (NH3 and $58,100)

OSHA has cited asalt manufacturing plant for 13 safety violations and proposed penalties of $58,100 for exposing workers to chemical hazards. The complaint inspection, which began in March, was initiated under the agency’s complaint process and expanded to the PSM NEP. In this case, it’s the use of anhydrous ammonia.  Seven of the 12 serious…...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

OSHA cites candy manufacturer for eight serious PSM violations (NH3 refrigeration and $44,005)

The inspection began in May under the agency’s PSM NEP. The violations stemmed from the company’s refrigeration system. Six of the eight serious violations involve deficiencies in the PSM program, including failing to:… Membership Required You must be a member to access this content.View Membership LevelsAlready a member? Log in here...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

34 incidents & 0 updates (8/19/13)

  Many THANKS to my NEWEST and RENEWING Corporate Partners in Safety… since 2013 since 2004 Since 2013 since 2013   2013 Fatality Tracker Electrical 22 (2012 = 68) (2011 = 81) (2010 = 90) (2009 = 100) Forklift/Manlift 45 (2012 = 52) (2011 = 84) (2010 = 110) (2009 = 88) Mining* 40 (2012…...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here
Scroll to Top