Town did not immediately notify the NRC as required following an incident when about 106 pounds of chlorine were released into the atmosphere. In addition, the town did not notify the state and did not provide the state or LEPC with written follow-up reports about the incident. EPA also identified other environmental violations during a […]
Journal of Occupational & Environmental Medicine: April 2012 – Volume 54 – Issue 4 – p 445–450 Leigh, J. Paul PhD; Marcin, James P. MD, MPH
The OSHA offices in NY state have been very busy this year! This is about the fifth or sixth significant PSM case from that state in 2012. The others were Ammonia refrigeration; this one involved flammable liquids and gases. Items that OSHA took issue with include:
Many thanks to Bob Cornett @ MSHA for sharing this Incident Alert! Click Here to download the PDF. WARNING! Document contains Graphic Images
SAFTENG believes this information to be accurate and delivers it as a community service. As such, it cannot apply to every specific fact or situation; nor is it a substitute for any provisions of 29 CFR Part 1910 of the Occupational Safety and Health Standards.
Below is a listing of OSHA’s General Industry Standards that require some type of written program or plan.
IMPORTANT NOTE: This is NOT an official listing and is NOT meant to include 100% of all REQUIRED postings, labels, and signs. It is an effort by one individual to identify those OSHA 1910 std’s that require some sign, posting, or label to better prepare a workplace regarding OSHA signage and posting requirements. The user
The vessel you are viewing is part of a PSM Covered process. I have blacked out pipe and vessel labeling, as it does not matter what the HHC/EHS is or the type of process. Pay close attention to the sight glass column in the center of the picture. The process vessel shown has a safe
MANY THANKS to my NEW & RENEWING “Partners in Safety” for their support! since 2012 since 2012 since 2008 formerly Beta Steel since 2006 2012 Fatality Tracker Electrical 35 (2011 = 81) (2010 = 90) (2009 = 100) Forklift/Manlift Mobile Equipment 29 (2011 = 84) (2010 = 110) (2009 = 88) Mining 36 (2011
A Process Hazards Analysis (PHA) may very well be the best tool that has come along to the safety profession since the fire extinguisher! I am kidding of course, well sort of, as the PHA methodologies (and there are many) can be used in so many situations that it is used outside of PSM/RMP as
Did you know that OSHA still does NOT require an actual Hotwork Permit, UNLESS you are doing the Hotwork in, on, or adjacent to a PSM covered process? It’s true, 1910.252(a)(2)(iv) uses the phrase “preferably in the form of a written permit“. It was not until OSHA put the Process Safety Management Standard (PSM) in place
