Free

Where are we REQUIRED to have ventilation? (OSHA)

There are five (5) basic types of ventilation systems: dilution and removal by general exhaust; local exhaust; makeup air (or replacement); HVAC (primarily for comfort); and recirculation systems Most ventilation systems generally involve a combination of these types of systems.  But there are some specific requirements, that need to be met:

Alternate Procedures for certain PRCSs in OSHA’s own words (1926.1203(e))

Unlike a PRCS that contains ONLY physical hazards, a space containing an atmospheric hazard cannot be reclassified as a non-permit space. However, if the atmospheric hazard in the PRCS can be controlled by FORCED AIR VENTILATION, we may enter under the CONTROLLED ATMOSPHERE instead of with full permit space procedures. The alternate procedures may be

Performing a Human Reliability Assessment (HRA)

This information is intended to assist in assessing the human contribution to risk, commonly known as Human Reliability Assessment (HRA).  There are two (2) distinct types of HRA: qualitative assessments that aim to identify potential human failures and optimise the factors that may influence human performance, and quantitative assessments which, in addition, aim to estimate

The hazards of UNSAFE pressure testing

A topic we have discussed many times here and if you have ever attended one of my process safety courses or presentations you have most certainly heard my dissertation on the criticality of pressure testing and leak testing and the fact that these safety-critical functions come with some serious risks, especially if the pressure testing

OSHA issues PRCS citations after double railcar fatalities (Toxic fumes & $419K)

An OSHA safety investigation has found another rail car products and services provider did not follow federal safety standards for working in permit-required confined spaces after two workers died from inhaling toxic fumes. OSHA determined that an employee became unresponsive after entering a natural gasoline rail car with the intent of cleaning the space on

When I switch from F-1 occupancy to H-3 occupancy, what is required?

Changing a building or space from an F-1 (Moderate-hazard factory) to an H-3 (High-hazard, physical hazard) occupancy is a significant move to a higher relative hazard category. Under the Ohio Building Code (OBC) and the International Building Code (IBC), this transition triggers a comprehensive regulatory review, and the existing space must be brought up to

Scroll to Top