If you want a spirited process safety debate, simply mention the practice of having “intervening valve(s)” before or after a Pressure-Relieving Device (PRD). There are some who swear that it is not allowed, but in fact, it is. This is how I learned about the “Car-Seal” program early in my career. ASME B31.12 is one […]
I have written many articles relating to ASME B31.3 and the QA/QC requirements each weld/flange must meet. However, in B31.12, Table IP-10.4.2-1 Required Nondestructive Examinations, the code requires 100% VT (Visual examination). The code goes on to require a more extensive examination sampling of 5-10% joints using with Liquid Penetrant (PT) or Magnetic Particle (MT).
Valves that must be operated during an emergency shall be examined periodically and partially operated at least once a year to provide safe and proper operating conditions. Routine valve maintenance procedures shall include, but not be limited to, the following:
Each operating company shall establish written procedures to minimize the hazard of an emergency. The procedures shall provide instructions to operating and maintenance personnel. The procedures shall describe the following: a process for prompt and adequate handling of all calls that concern emergencies, whether they are from customers, the public, employees, or other sources, and
As I dig deeper into ASME B31.12, Hydrogen Piping, I continue to find nuggets of best practices for HAZMAT piping. ASME B31.12 requires each operating company having industrial piping, pipeline, and commercial and residential systems to have Operational, Maintenance, and Emergency Plan(s) that include the following:
On April 24, 2024, the department’s Occupational Safety and Health Administration presented the draft rule’s initial regulatory framework at a meeting of the Advisory Committee on Construction Safety and Health. The committee, which advises the agency on safety and health standards and policy matters, unanimously recommended OSHA move forward expeditiously on the Notice of Proposed
I have been working with several clients who are on a Hydrogen Fuel journey. It is fun to get deep into process safety protection schemes regarding NFPA 2 and ASME B31.12 and see the similarities and extra code requirements when dealing with large H2 gas systems. One of the interesting items regarding H2 piping is
Occasionally, we see some pipe labeling requirements that exceed those found in ASME A13.1. NFPA 2, 2023 has a few: (emphasis by me)
Hazardous chemicals which are carried on transportation vehicles, including rail cars, can be subject to EPCRA reporting when they are not under active shipping papers and have reached the consignee identified on the shipping papers. See House Report No. 99-962 (Committee of Conference), October 3, 1986. 99 Cong. Conf. H. Report 962, at 311, which
An experienced electrician checking conductors at an industrial facility unknowingly accessed an energized breaker bucket inside a substation and shorted phase to phase on the line side of the energized breaker switch at 347/600V. This resulted in an electrical shock, creating an arc flash. The worker suffered first and second-degree burns to their wrist, hand,
Respondent is the facility’s owner and operator. The EPA inspected the Facility from July 27 to July 29, 2021, to determine the Respondent’s compliance with Section 112(r) of the CAAmand 40 C.F.R. Part 68 (“the Inspection”). Operations at Respondent’s Facility include, among others, repackaging chlorine for utilization in sodium hypochlorite bleach manufacturing. The Facility also
At 8:04 a.m. on May 11, 2023, an employee working for an oil and gas support services company was found dead. On 5/10/23, the night before, the employee had instructed his coworkers from other contractors to go home, and he would finish the job. This was the last time anyone had spoken to the employee
