2014 Photo of the Week #37 (Smoking & Flammable Gases)
2014 Video of the Week #37 (Compressed Gas Cylinders)
Another great video showing the power of a compressed gas cylinder! This from a German TV show called… Nicht nachmachen! (English: Don’t Do This!)
Hazardous Locations (HAZLOCs) and Medical Devices
Not meant to be a trick question, but the matter of workers who MUST wear medically prescribed devices and work in Class I, II, and/or III Hazardous Locations tends to be a constant question for facilities that have HAZLOCs. Low voltage equipment is always a battle in HAZLOC! I swear the engineering schools in this
OSHA PSM citations @ Ice Maker (NH3 refrigeration & $274,700)
Inadequate safeguards to protect workers against potential ammonia releases at an ice plant have resulted in $264,700 in fines at a nationwide ice manufacturer and distributor. This inspection was conducted under OSHA’s PSM Covered Chemical Facilities National Emphasis Program. OSHA cited the company for 19 violations of workplace safety standards following a comprehensive inspection that
Catastrophic failure of Ammonia Cryogenic Storage Tank w/ Ammonia Fire (7 deaths and 57 injured)
On March 20th, 1989, the pressure in the cryo tank climbed abruptly between 11:00 a.m. and 11:15 and the tank burst at its base. Under the effect of the wave escaping from the gaping breach, the reservoir broke free from its stand, pushed in the opposite direction. It destroyed the reinforced concrete protecting wall and
How far would you go with the “co-Location” coverage to determine PSM/RMP coverage?
This summer we saw a 300,000-gallon water tank fail which pushed a generator into a covered process which led to a release of the HHC/EHS. The questions I wish to pose are: Should the water tank have fallen under the PSM/RMP program due to its proximity to the covered process? Should the proximity of the
Drawing the line between “Operators” and “Emergency Responders”
During my 24-hr Tech course last week we had an interesting discussion about “the line” between an operator taking “emergency actions” and an operator being an “emergency responder”. This has to be a top question in all our HAZMAT courses at industrial facilities; however, OSHA has actually made the line very clear in their 2007
Knowing the limitations of your emergency response equipment
This is not the first time I have written about “limitations” of our emergency response equipment, but this is one I just learned first hand. Let me be CLEAR HERE… ALL equipment and gear we use has limitations so this is not any type of slam against any manufacturer – in fact the piece of
42 incidents & 0 updates (9/4/14)
2nd Quarter UPDATE with 289 Shocker and Accident Photos Now over 13,750 exclusive unsafe acts/conditions and accident/injuries photos and over 1,000 ppt’s & doc’s from more than 2,776 contributors! Many THANKS to my NEW and RENEWING “Partners in Safety“ since 2011 since 2014 since 2014 2014 Fatality Tracker Electrical 37 (2013 = 32) (2012
SCBA Cylinder Retester Locations (PHMSA)
This is a neat and very helpful tool for those of you needing to get your compressed gas cylinders “hydro’ed”. Using Google Maps, all one has to do is type in their zip code and the map will provide locations within a 15, 25, and 50 mile radius of those companies that can either perform