Field-expedient protection includes steps taken to provide immediate protection of personnel/materiel and to enhance protection of mission-essential facilities in the event of an incident. These procedures and planning factors are often included in emergency-action discussions of “protection in place” when it is required to sustain critical operations through an event or key infrastructure facilities that […]
The International Fire Code has another version of OSHA’s and EPA’s General Duty Clause. It is 5001.3 Performance-based design alternative. The code contains 18 elements that very closely mirror OSHA’s PSM and EPA’s RMP requirements, but the BIG DIFFERENCE is that the code makes no mention of quantities/thresholds! The rule applies to all hazardous materials,
Often times we get so involved with meeting OSHA and EPA regulations that it is easy to loose site of the State Fire and Hazardous Material codes. In some states these codes can be even more stringent that OSHA and EPA process safety requirements! PLEASE keep in mind, each state will have their OWN SET
EPA issued a Process Safety Alert in 2007 in response to several investigations by the National Transportation Safety Board’s (NTSB) which involved the failure of excess flow valves (EFV). While EFVs are in extensive service and have prevented numerous pipe or hose breaks from becoming much more serious incidents, experience has shown that in some cases the
A preliminary total of 4,609 fatal work injuries were recorded in the United States in 2011, down from a final count of 4,690 fatal work injuries in 2010, according to results from the Census of Fatal Occupational Injuries (CFOI) program conducted by the U.S. Bureau of Labor Statistics. The rate of fatal work injury for U.S. workers in
The information in this report was collected by staff in the North Carolina Hazardous Substances Emergency Events Surveillance (HSEES) Program. Ammonia releases in North Carolina have resulted in injuries, hospitalizations, and workplace evacuations. Some examples of ammonia releases in NC include:
Date of Incident: 12th September 2012 Time of Incident: App. 5.15am Location: Oil and Gas Construction Project A fatal incident occurred involving a Non-Destructive Test (NDT) personnel. The deceased was electrocuted while adjusting the position of portable lighting pole connected with trailing cable to distribution board which is 50 meters away. Preliminary finding shows that there was
A fatality occurred at a warehouse involving an employee taking a sample from a 500-gallon (4,500 pound) stainless steel Intermediate Bulk Container (IBC). Preliminary findings indicate the employee was working alone in an area with limited egress. The employee elevated the IBC approximately 18 inches using a forklift to take a sample from the bottom
MANY THANKS to my NEW & RENEWING “Partners in Safety” for their support! since 2008 since 2008 since 2012 since 2012 2012 Fatality Tracker Electrical 59 (2011 = 81) (2010 = 90) (2009 = 100) Forklift/Manlift Mobile Equipment 45 (2011 = 84) (2010 = 110) (2009 = 88) Mining 64 (2011 = 248)
