On April 17, 2000 at approximately 7:00 a.m., the worker started his shift at the work site. The total number of workers on shift the day of the incident was 16 and the worker’s crew comprised of 6 workers. The worker was employed as a general labourer. He performed various work activities on a GYP […]
An Israeli safety study looked at a practice termed “Management by walking around” (MBWA). This practice has aroused much interest in management science and practice. The purpose of this study is to demonstrate the adaptation of this practice to safety management. We describe a three-year-long case study that collected empirical data in which a modified
The Occupational Safety and Health Administration (OSHA) is alerting employers and workers using the CSE Corporation’s SR-100 Self-Contained Self-Rescuer (SCSR) to potential failure problems with these respirators. Click Here to download the pdf.
MANY THANKS to my NEW & RENEWING “Partners in Safety” for their support! since 2009 since 2012 since 2012 since 2008 formerly Beta Steel since 2006 2012 Fatality Tracker Electrical 36 (2011 = 81) (2010 = 90) (2009 = 100) Forklift/Manlift Mobile Equipment 31 (2011 = 84) (2010 = 110) (2009 = 88) Mining
This DOSH Directive implements OSHA’s National Emphasis Program (NEP) for Chemical Facility Process Safety Management in the State of Washington. The purpose of the NEP is to reduce or eliminate workplace hazards associated with the catastrophic release of highly hazardous chemicals. Effective 5/2/2012. Statewide, a minimum of three inspections per year will be completed using
A great source for FREE HEAT Awareness posters! CLICK HERE to download the pdf.
Loss of Primary Containment (LOPC) is a term used to describe an event where a pipe or vessel leaks or fails, releasing its contents. No Process Hazards Analysis should be considered complete until each circuit of pipe/hose and vessel(s) has been reviewed for LOPC.
PLEASE NOTE: this document can be download without the watermark and in WORD in the Safety Document librabry.
EVERYONE IS RESPONSIBLE FOR SAFETY Safety is everyone’s responsibility! As an employee, you should: a. Learn to work safely and take all rules seriously. b. Recognize hazards and avoid them. c. Report all accidents, injuries and illness to your supervisor immediately. d. Inspect tools before use to avoid injury. e. Wear all assigned personal protective
Cylinder Colors While the cylinder label is the primary means of identifying the properties of the gas in a cylinder, the colour coding of the cylinder itself, can often time provide a further guide. Cylinder Shoulder – European Standard Color CodingThe color applied to the shoulder, or curved part, at the top of the cylinder,
ACOEM Guideline – The Use of Contact Lenses in an Industrial Environment May 4, 2003 More than 34 million Americans wear some type of contact lenses. Of this number, many are employed as part of the industrial workforce. As the health professional most familiar with the hazards encountered in the industrial setting, the occupational and environmental medicine (OEM)
This information was put together by George G. Maher, Ag Safety Specialist @ North Dakota State University in 1995!!!!
