RIP On January 21, 2025, an explosion at the Port of Barcelona resulted in one death and several injuries. The explosion occurred in a methyl acetate tank during maintenance work. WARNING! Video may be upsetting to some viewers.
One of the more common issues we come across in regards to Hot Work is the encroachment of combustible/flammable hazards within the REQUIRED 35′ Fire Safety Zone. 1910.252(a)(2)(vii) Relocation of combustibles. Where practicable, all combustibles shall be relocated at least 35 feet (10.7 m) from the work site. Where relocation is impracticable, combustibles shall be
A recent marine casualty, resulting in a fire and severe injuries to two crewmembers, highlights the risks associated with:
Section 1910.255(e) requires that a periodic inspection of resistance welding equipment be made by qualified maintenance personnel and that a certification record be generated and maintained. The certification shall include:
At 10:30 am, on October 16, 2023, Employee #1, 20, was working for a construction gas & oil support contractor. Coworkers were cutting and welding an eye-lifting plate on a compressor skid. A fire hazard consisting of miscellaneous petroleum products had been allowed to accumulate on, in, and around the compressor skid area.
Back in 2010, I posed the question… do the oxygen and acetylene cylinders that are being used to perform the Hot Work need to be 35′ away from the point of the Hot Work? For those who commented, it was clear they thought I was crazy. “It has never been enforced”, “I have been welding/cutting
An investigation into an industrial explosion at an oil and gas facility has led to significant fines being laid by WorkSafe BC. A contractor who handles oilfield waste, has been ordered to pay just over $42,000 for safety violations. Two welders, working directly above a fluid tank, were injured after an explosion inside a shaker
