Minimum Ignition Energy (MIE)

If my bonding/grounding system’s resistance to ground needs to be <10/25 ohms, then why is ESD footwear allowed a resistance of 1,000,000 ohms?

This is another Top 10 question on flammable liquids safety I get from clients, cold calls, referrals, and friends. Most are familiar with the testing limits for path to ground on bonding/grounding stations of 10/25 ohms. In my previous post tonight I explained where these 10 and 25 ohm limits came from and how they…...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

Scrubbing the inside of a mix tank with Naptha using a Teflon bristle brush is not advised

Another incident where the lack of respect for static electricity and flammable atmospheres results in severe injuries. A Teflon bristle brush generates a lot of static electricity; coupled with the low flashpoint of Naptha (73F) and we have a serious hazard. At 5:30 a.m. on February 24, 2020, an employee, 42, was scrubbing interior surfaces…...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

Switch Loading + Static Electricity = Fatal Burns

FACT: Most flammable liquid vapors have a Minimum Ignition Energy (MIE) of less than 1 millijoule (mJ). Most of us do not even feel static which is less than 15 mJ. So the amount of energy necessary to ignite most flammable vapor atmospheres is not even observable by humans. At 6:15 p.m. on October 30,…...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

What is a “flash point”?

I teach about a dozen flammable liquid courses annually, and it is one of my favorite courses to teach, as I love the technical side of hazardous materials. And my course always starts with a discussion around the 1st step in making a flammable liquid a hazardous material… FLASH POINT. And over the 30+ years,…...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here
Scroll to Top