No hunman and no organization is perfect! Although we should strive for perfection in all aspects of business (Production, Quality, Cost Control, and EHS), we often mis-step or possible loose our way altogether. But how bad do things have to get before it is a REAL PROBLEM?… Membership Required You must be a member to...
Missed Preventive Maintenance Inspections/Tests Read More »
Many THANKS to my NEW {amp}amp; RENEWING Corporate Partners in Safety! since 2007 since 2011 since 2009 since 2/11 2011 Fatality Tracker Electrical 5 (2010 = 90) (2009 = 100) Forklift/Manlift Mobile Equipment{amp}nbsp; 27 (2010 = 110) (2009=88) Mining 43 (2010 = 480) (2009 = 586) Explosions 45 (2010 = 246) (2009 = 302) Cranes…...
31 incidents & 1 update (3/20/11) Read More »
I continue to see facilities struggle with the emergency shutdown SOP requirements and how it is all suppose to flow and fit into the daily operations. In this post I will try and lay out a flow to help make sense of these PSM/RMP requirements. I am hopeful you can learn from my mistakes, as…...
Emergency Shutdown (when does it get activated) Read More »
We do not see these types of failures often, but when we do it can almost always be traced back to human error. Back in 2008, a tube and shell heat exchanger catastrophically failed when workers accidentally closed two different valves at two different times between the vessel and its relief valve. On June 10,…...
Car Seal Program and Relief Valves Read More »
Does the title make you scratch your head? I usually get some strange looks when working with a client who is trying to understand what the PSM compliance cycle looks like. To start with, let’s look at what OSHA/EPA requires in our operating procedures: 1910.119(f)(1)(ii) Operating limits 1910.119(f)(1)(ii)(A) Consequences of deviation 1910.119(f)(1)(ii)(B) Steps required to…...
How to use your PHA to write your SOPs Read More »
If your PSM/RMP covered process contains a flammable liquid, 1910.106 has provided us with some regulatory facility siting requirements that we can quickly inspect to ensure we meet the minimum compliance distances. If you have liquefied petroleum gases within your facility, 1910.110 provides some basic siting requirements that should be met to have an argument…...
Many chemical processes that are covered under OSHA’s PSM and EPA RMP rules utilize one of the most popular forms of passive mitigation ever known…Diking. However, on the other hand, many of the facilities have not included their dikes in their Process Safety Information (PSI) or their Mechanical Integrity Programs (MIP)…. Membership Required You must...
Is your Diking in your PSI and MI Read More »
I had an interesting dissertation given to me on how to calculate “frequency” when analyzing a PHA scenario during a recent PHA. Although it sounded logical, it was completely off base and thus would have shown the facility at very low risk for all their scenarios. This is something we see from time to time…...
Tips when performing PHA’s and how Chemical Process Safety should be viewed Read More »
Since the great recession of 2008 -2010 we have seen an increase in the used equipment market. This is due to so many businesses going under and auctioning off their equipment and the remaining businesses needing to find ways to save $…. Membership Required You must be a member to access this content.View Membership LevelsAlready...
Buying a used PSM/RMP facility or used equipment for PSM/RMP Read More »
So, who has to do Confined Space Evaluations, and when must this evaluation be done? The short answers are ALL General Industry (1910) employers and at the time the standard was promulgated and before each entry. Let me explain…… Membership Required You must be a member to access this content.View Membership LevelsAlready a member? Log...
Evaluating Confined Spaces (1910.146(c)) Read More »
One of the most asked-about standards is OSHA’s Permit-Required Confined Space (PRCS) standard. The standard can be difficult to decipher, so this post attempts to break down an employer’s entry options. We should view the standard as offering three (3) entry options. Each option has its own set of rules and pros and cons. Once…...
Making sense of entry options under OSHA’s PRCS Entry Std. 1910.146 Read More »
Like many safety professionals, I learned there is a HUGE difference in flammable liquids the HARD WAY. Having a strong background in fire/HAZMAT, even as an IFSTA instructor 20 years ago; I thought flammable liquids were all about flash points and LEL. To an emergency responder, that may work, but as a safety engineer responsible…...
Making sense of non-conductive flammable liquids Read More »
