A question that seems to be asked more and more is “do my harnesses and lanyards fall under the same requirements as those used on construction sites?”. This is another one of the questions that I have no idea where it came from or how the myth that the Personal Fall Arrest System (PFAS) used […]
In 2012, OSHA revised the standard, 29 CFR 1910.1200, Hazard Communication (HCS 2012). [Reference, 77 Fed. Reg. 17574 (Mar. 26, 2012)]. This rulemaking also made minor changes to several other OSHA standards related to hazardous chemical communication, such as revising the legend used on the warning sign to a regulated work area specified in OSHA’s
Most safety professionals know there is an actual rationale as to when use DANGER, CAUTION, and WARNING signs and how these signs are color-coded; however, there are a lot facilities who may not have a safety professional who can offer this guidance as to when to use signs, how to use them and which one
ASME B31.3 (Process Piping) treats double-walled piping—commonly referred to as jacketed piping—as two (2) distinct pressure systems. Because the failure of the inner pipe (core) or outer pipe (jacket) carries different risks, the code requires specific sequences and methods to ensure the integrity of both.
I absolutely hate when politics enter into safety, but it is an unfortunate fact that OSHA has to deal with on an on-going basis. However, like all politics these days, it is just getting ridiculous in what is being expected of OSHA from Congress, that group who can not seem to keep their own chambers
This video shows BOTH aspects of a Fall Protection Plan: Personal Fall Arrest System (PFAS) and Rescue. When BOTH aspects are in place we have SUCCESS!
We dont see this citation very often, but it is a standard and it is one that we use often… 1910.144(a)(1)(iii) Stop. Emergency stop bars on hazardous machines such as rubber mills, wire blocks, flat work ironers, etc., shall be red. Stop buttons or electrical switches which letters or other markings appear, used for emergency stopping
OSHA’s 1910.178 TABLE N-1. – SUMMARY TABLE ON USE OF INDUSTRIAL TRUCKS IN VARIOUS LOCATIONS can be difficult to use because its layout on-line had been altered. So I found this from many years ago that one of the safety pro’s at Westvaco created. Hope it helps…
Where does the time go? As most practicing safety professionals in the USA know, the time has come to do our annual summary of our OSHA 300 Log. But for many these logs can be very confusing. So here is a reminder and what is required for us to comply…
Last week OSHA sent another “Hazard Alert” letter to an employer regarding their practice of using on-site EMT’s to provide care to employees. In this case, OSHA is again asserting that the EMT’s are performing duties outside their certifications and the purpose of the EMT’s is to avoid recording injuries. Medical care must be
Over the holidays I came across this “letter” from OSHA to an employer regarding how the facility was “managing” their “1st Aid cases” using on-site EMTs who were not actually state certified EMT’s, nor had they been trained to identify and assess musculoskeletal disorders (MSDs). In reading the letter, OSHA was clearly implying that these 1st
