Safety Info Posts

Rubber insulating gloves periodic electrical tests – REQUIRED frequency

Facilities that have qualified electrical workers MUST have glove testing/replacement program and most do; however, there is always the question as to “when does the clock start on the testing frequency”?  Gloves that have been issued AND removed from their packaging the clock starts right away; however, gloves that remain in the manufacturer’s packaging the…...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

So does my facility have to hire an expert to perform an Arc Flash Analysis to be compliant with OSHA

There have been millions of dollars spent over the past decade on Arc Flash Analysis.  And although I am one who spent some of that money because I believe in their value, I am asked often if this costly analysis is actually required.  Most facilities have hired an electrical expert to perform a very detailed…...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

High Visibility Vest – Hotwork & Electrical Work

We have been seeing a lot of companies requiring all workers to wear high visibility vests in all areas of their facility.  Most of these vests are made of synthetic materials and this brings about my concerns.  SAFTENG has recently been at three different facilities where we have witnessed welders and electrical workers wearing these…...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

OSHA LOTO Citations @ food box manufacturer ($122,500)

Mere months after two employees were injured by dangerous machines, the facility again put workers at risk. Acting on a complaint, OSHA found workers unjamming and servicing machines without proper safeguards during an Aug. 25, 2014, inspection. This is the fourth time in the past year that the facility has been cited for hazards at…...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

OSHA Rejects Arizona State Plan Changes….. February 6, 2015

OSHA is issuing a final decision of what Arizona “shall” do to protect workers in that industry (15 page decision (scheduled for release tomorrow).  The short summary is, Arizona (ICA/ADOSH) will need to enforce what’s in subpart M to retain its 18e status.  You can ALL feel a measure of humble pride that we had…...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

MARPLOT 5.0 Available for Windows and Mac

MARPLOT 5.0 is now available for download at http://www2.epa.gov/cameo/marplot-software. The program has been completely redesigned and has many new features. Note: If you’re upgrading to MARPLOT 5.0 from MARPLOT 4.x or MARPLOT 3.x, follow the instructions in the guidance documents (provided on the download page) to ensure that your data is transferred successfully to the…...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

45 incidents & 0 updates (2/3/15)

  Over 12,000 exclusive unsafe acts/conditions and accident/injuries photos and over 1,100 ppt’s & doc’s from more than 2,782 contributors!   2015 Fatality Tracker Electrical 7 (2014 =55) (2013 = 32) (2012 = 68) Forklift/Aerial 5 (2014 = 60) (2013=62) (2012 = 52) Mining* 5 (2014 = 401) (2013=87*) (2012 = 92*) *ONLY developed nations…...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

OSHRC on guarding of horizontal shafting below 7′ with an “arbor” and protrusions on shaft ends

The company operates a chicken processing plant which employs approximately 500 employees at the facility and has approximately 11,000 employees company-wide. On January 15, 2014, an OSHA Compliance Safety and Health Officer conducted a planned programmed inspection.  During the inspection, while at the chicken cut-up area in the facility, the CSHO observed two employees on…...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

EPA RMP General Duty and EPCRA citations @ “Neatsfoot Operation” (NH3 refrigeration; $12K w/ $83K SEP)

Scenario:  Manufacturing is shutdown for long holiday weekend.  Upon their return after the long holiday weekend, the refrigeration techs find the refrigeration process shutdown and they are unable to restart the system for some reason.  They call in their refrigeration contractor who determines that the system is EMPTY – NO NH3!  The facility assumes that…...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here

Is your propane cylinder SAFE? (PHMSA)

Propane cylinders must be periodically requalified to be safe for use. Do not use cylinders that have not been requalified because you risk property damage, severe injuries, or death.  To see if your cylinder is okay to use, look for these markings:… Membership Required You must be a member to access this content.View Membership LevelsAlready...

Membership Required

You must be a member to access this content.

View Membership Levels

Already a member? Log in here
Scroll to Top