LOCKOUT is a more effective means of ensuring the de-energization of equipment; it is the preferred method because lockout-based safety programs are less susceptible to human error, and tagout devices have INHERENT PHYSICAL LIMITATIONS. Therefore, if the energy isolating device is capable of being locked out, the standard requires LOCKOUT unless the employer can demonstrate that a tagout system will...

The short answer is NO…UNLESS your online training is SPECIFIC to your workplace, LOTO written program, and machine energy isolation procedures … HomeRead More »

The Control of Hazardous Energy (lockout/tagout) standard regulates the servicing and/or maintenance of chemical process systems and associated piping, even though the energy sources (e.g., chemical and thermal energy) and control methods used in process hazards management are somewhat different from those encountered with machinery and mechanical equipment. Typically, the procedural steps required...

One of the most overlooked LOTO program requirements is the “Means to Enforce”. OSHA regulations state the following about procedures to enforce the program… … HomeRead More »

Do you include your Fire Extinguisher company under your PSM/RMP Contractor Safety Program? … HomeRead More »

FIRE EXTINGUISHER FATALITY Youth killed while demonstrating safe use of fire extinguisher. … HomeRead More »

Many THANKS to my NEW & RENEWING Corporate Partners in Safety! since 2005 since 3/2011 since 2007 since 3/2011 2011 Fatality Tracker Electrical 11 (2010 = 90) (2009 = 100) Forklift/Manlift Mobile Equipment  31 (2010 = 110) (2009=88) Mining 65 (2010 = 480) (2009...

MSHA has been made aware of a hazardous condition that may exist in 600 volt and 1000 volt circuit breakers. … HomeRead More »

IncidentWorker was in the process of checking gauges when suddenly he felt a pulling motion on his right hip and back side. His coveralls had become entangled in an unguarded shaft and were being sheared off. Unable to escape or break free of the drawing motion the worker was able to reach the motor clutch and disengage the equipment, thus ending the ordeal. In the period of time (approximately 15-20...

What is management leadership in safety and health? Management demonstrates leadership by providing the resources, motivation, priorities, and accountability for ensuring the safety and health of its workforce. This leadership involves setting up systems to ensure continuous improvement and maintaining a health and safety focus while attending to production concerns. Enlightened managers understand...

1.) What is a Safety Contact? Safety Contacts are a conversation between a “manager” and an employee that is focused exclusively on safety! 2) Who is considered a Manager? A “manager” is considered to be all levels of management (usually defined by “exempt” status), but also includes the Leadership Team such as Engineers, Shift leads/ Supervisors, and other’s designated by the Business Manager or Safety...

Measurement is a key step in any safety management process and forms the basis for continuous improvement. … HomeRead More »